All you have to know about scuba wetsuit

Here you can find everything you need to know about the diving suit

One of the most important implements when carrying out the diving activity, is the diving suit, thanks to it the person remains protected against external or extreme water temperatures. This allows the scuba wetsuit to be known as an isothermal suit, as it helps to maintain the highest body temperature in those who use it and thus avoid an accident such as hypothermia in the case of very cold waters.

cold and diving

Most diving suits allow protection against bumps, scrapes or any damage that can be caused by either a rock or a sharp or sharp element, all this thanks to the fabric to be used for its preparation, the goal is to have a suit that can generate as much security as possible to the one who practices diving.

In the market you can find two types of scuba wetsuit, be they dry suits or wet suits. The suits made with neoprene are the most requested, in the same way a variety of fabrics are often used in some cases to generate the necessary protection and aesthetics.

Dry scuba wetsuit

This type of suit is mostly used in the waters with a very cold temperature, this type of diving suit presents in its confection tight seals on the ankles, neck and wrists. All this is to prevent water from entering the suit and causing a problem for the diver, many of the divers who wear this type of diving suit are usually placed under the warmest clothing and thus generate a double layer of protection.

Wet scuba wetsuit

Then we have wet scuba wetsuit, this suit is usually neoprene, which is a material that has in its material the ability to maintain a series of air bubbles, which serve as insulators and usually modify everything related to buoyancy of the diver. Unlike dry scuba wetsuit that are looser, wet suits must be attached to the body, this is related to the effect that the thin film of water that usually leaks inside begins to warm up and works as an insulator, and prevents the total loss of temperature.

This type of suit is much more accessible than dry suits, dry suits are much more expensive, it is more common to get a wet diving suit than dry suits. They are usually manufactured between 1 and 8 mm, with the thickest being the one that best withstands extreme temperatures, the only disadvantage is that the material is heavier and for some a bit uncomfortable.

Types of wet suits models

The short or shorty suit, as it is also known, is usually the most popular among divers who usually go to tropical waters, the most common being 3 mm thick. It is not highly recommended to be used in cold waters unless it is more mm thick in the material.

The piece is another wet suit model that is also widely used among divers, because of its ease of placement and the comfort it offers, it also comes with a diversity of thickness in its clothing material for different water temperatures.

And finally, we have the 2-piece scuba wetsuit, which is combined with gardener trousers, which is usually attached to the shoulders and a jacket that repeatedly has a crotch. It is a suit that allows great protection in the upper body of the diver.

Leave a Reply

Your email address will not be published. Required fields are marked *